高端电压小功率耐压检测仪（耐电弧焊接耐压检测仪）-（医学控住）

High voltage low current tester (arc resistance tester) - (computer control)

产品的英文名称：耐电弧试验机

Product name: electric arc resistance tester

软件参数：NDH-A

Product model: NDH - A

做到条件：GB/T 1411-2002《混合物隔绝建材耐高压得很低的电流大小脉冲蓄电池充电的可靠性试验》（符合IEC  61621-1997）及ASTM D495等标准的的达到要求定制手工制造的，并达到IEC 149、UL 746A等做实验的时候做法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

包括常用时间范围及效果：

本经过多次实验发现机是，并按照广泛应应用于直流无刷电机、电气产品和生活费电气产品等行业中的技工用塑胶板材、树酯胶胶和隔绝层漆等隔绝层文件的耐电弧放电放电耐热性综合评价，主应用于固态物体隔绝层文件如：塑胶板材、pe膜、树酯胶、矿石、瓷砖、破璃、隔绝层油、隔绝层漆、纸壳等物料的耐电弧放电放电耐热性测量；

本进行科学實驗设计机由求算机调节运转，还可以显现现行进行科学實驗形态及进行科学實驗事件，进行科学實驗结速后并保留现行进行科学實驗数据表格，并可直接打印.基准实验所申请书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为左右分立式设计，下部分为实操系統，上侧为应力测试箱。

2 本护肤品按照*新智能化管控能力，借助挑选步骤（IEC或ASTM）可重新做出试验检测，并在电子设备上屏幕上显示做实验的时候阶段和結果。

3 **功能稳定，抗电磁波辐射水平强，测试图片定位精高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断周期误差度：超过 ±10ms

2 调压器发热量：2kVA

3 固定实验设计电压降：12.5kV

4 校正电流电压精密度较：±3%

5 电流大小调控精密度：±10%  工作电流侧量精密度较：1.5%

6 参比电极对钢材拉伸试验工作压力：（0.5±0.05）N

7 探针涂料：钨棒

8 探针长度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 动用生态溫度：（23±2）℃

10 使用的区域室内湿度：（50±5）%

11 主机电源：220V±5%  50Hz  10A

12 测试    技术：   国家标准/美标/10 mA 连着/20 mA 接连/30 mA多次/40 mA不断

13 测试系统程序以下的：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 新产品具体型号：

NDH-A    耐焊弧冲击试验仪-微机抑制

NDH-B    耐电弧焊接试验报告仪-触屏屏操控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！